Dispositivo con una flessibilità particolare in grado di seguire la morfologia della struttura (salita su coperture a volta). Ogni gradino è certificato come punto d’ancoraggio in classe A secondo la norma EN 795:1996.

Thanks to their extreme adaptability, aluminium Securail®  rails are able to transform into ladders with simple addition of special steps, which can be fixed or folding.

Securail® vertical ladders are the best solution for all those situation in which, even taking into account aesthetics, you need a secure access to work area.

The centre, anodised aluminium rail has a section of only 3 cm per side and steps are bolted to it through rear grooving.The operator connects his PPE to the slider trolley that slides along the rail. It follows the operator’s movements both up and down but locks immediately in the event of sudden increases in speed, due for example to a fall.

With Securail® vertical ladders, the operator stays safe: an anti-intrusion door prevents ladder access by unauthorised personnel and the landing section accompanies the worker as he accesses the work area at a height.

The system is certified in accordance with standard EN 353-1 and is covered by a 10-year guarantee.

Securail Product detail.PDF

Ladder with integrated rail for anchoring the operator through the trolley in order to avoid both the fall by tilting (to the outside) and, vertical fall. In this way, diversely from the ladder with safety cage, the operator is protected from all possible falls and from possible impacts against the cage itself, which makes rescue operations exceedingly difficult.

With the Safeladder® integrated rail step ladder, the operator can safely move up and down the ladder because he is connected with a harness to the slider trolley equipped with energy absorber that follows the movement of the operator and intervenes by latching, in the case of slipping. The ladder is approved for 2 or more operators provided they are at a distance of 7 m from one another. Safeladder® is available in different lengths and with no height limit, provided a resting landing is set at least every 15 m or according to customer’s requirements.

The different types of supports available allow for ladder installation both on metal structures and on reinforced concrete walls. The system is in compliance with standard EN 353-1.

Safeladder Product detail.PDF